Description
A brite tank is a vessel used to mature, clarify and carbonate beer. It gets its name after the clear, bright beer stored and processed in it. Most breweries use brite tanks as serving vessels, too.
While it would take around two weeks for beer to clarify and carbonate in a conical fermenter, a bright beer tank needs less than two days. Typical breweries have one brite tank for every four to five conicals.
A special dished bottom collects the leftover yeast, letting you draw clear beer down to the very last drop. Unlike conical fermenters and other vessels, bright beer tanks yield close to 100% of the volume, letting you easily perform packaging calculations.
A large, dimpled jacket on the coat makes sure the temperature inside the brite tank is always optimal. Thanks to the vertical construction of the cooling jacket, the stored liquids will be efficiently chilled even if the tank is not full to the brim.
Durable, high-quality materials enable the bright beer tank to stay in pristine condition, even after years of professional usage.
STANDARD
Operating Pressure – 2.5 bar
Operating Temperature – (min)-5°C/(max)30°C
Pressure Gauge
Insulation – Polyurethane foam layer (60 mm)
Manway Door – PED Oval
Legs – Adjustable height and tilt
Temperature Control
Cooling Jacket on Coat
Cooling Jacket on Bottom
Thermometer (analog)
Thermowell (with PG9 fitting)
Valves
Sample Tap – PED Butterfly valve (DN25 DIN11851)
Partial Discharge – PED Butterfly valve (DN40 DIN11851)
Total Discharge – PED Butterfly valve (DN40 DIN11851)
Safety valve
Vacuum valve
Type Plate – With note card
Ladder rack – Coat height 1500 mm onwards
Welding
Outside – Brushed finish
Inside – Brushed and polished (Ra<0.8 µm)
OPTIONS
Operating Pressure – 3 bar (Thicker cladding)
Electronics Box
Manhole Cover – Custom
Manway Door – Custom
Temperature Control
Thermoregulator (digital)
Cooling piping system (with solenoid/electromotor valves)
Valves & Fittings
Carbonation fitting
CIP pipe with spray ball and Ball valve (DN25 DIN11851)
Ball or butterfly (Clamp, Garolla, WG, Macon, Gas, etc.)
Stainless Steel Caps (on all valves and fittings)
PT100 probe
Level Indicator – Ø24 mm acrylic tube (scaled, closed and connected to the CIP pipe)
Finish – Marble Polished (outside)